Introduction to WPA Supplicant
WPA Supplicant is a Wi-Fi
Protected Access (WPA) client and IEEE 802.1X supplicant. It
implements WPA key negotiation with a WPA Authenticator and
Extensible Authentication Protocol (EAP) authentication with an
Authentication Server. In addition, it controls the roaming and
IEEE 802.11 authentication/association of the wireless LAN driver.
This is useful for connecting to a password protected wireless
access point.
This package is known to build and work properly using an LFS 12.4
platform.
Package Information
WPA Supplicant Dependencies
Required (Runtime)
Configuring the Linux
Kernel for Wireless
Recommended
libnl-3.11.0
Optional
libxml2-2.14.5
Installation of WPA Supplicant
First you will need to create an initial configuration file for the
build process. You can read wpa_supplicant/README and wpa_supplicant/defconfig for the explanation of
the following options as well as other options that can be used.
Create a build configuration file that should work for standard
WiFi setups by running the following command:
cat > wpa_supplicant/.config << "EOF"
CONFIG_BACKEND=file
CONFIG_CTRL_IFACE=y
CONFIG_DEBUG_FILE=y
CONFIG_DEBUG_SYSLOG=y
CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
CONFIG_DRIVER_NL80211=y
CONFIG_DRIVER_WEXT=y
CONFIG_DRIVER_WIRED=y
CONFIG_EAP_GTC=y
CONFIG_EAP_LEAP=y
CONFIG_EAP_MD5=y
CONFIG_EAP_MSCHAPV2=y
CONFIG_EAP_OTP=y
CONFIG_EAP_PEAP=y
CONFIG_EAP_TLS=y
CONFIG_EAP_TTLS=y
CONFIG_IEEE8021X_EAPOL=y
CONFIG_IPV6=y
CONFIG_LIBNL32=y
CONFIG_PEERKEY=y
CONFIG_PKCS12=y
CONFIG_READLINE=y
CONFIG_SMARTCARD=y
CONFIG_WPS=y
CFLAGS += -I/usr/include/libnl3
EOF
If you wish to use WPA Supplicant
with NetworkManager-1.54.0, add the
following options to the WPA
Supplicant build configuration file by running the following
command:
cat >> wpa_supplicant/.config << "EOF"
CONFIG_CTRL_IFACE_DBUS=y
CONFIG_CTRL_IFACE_DBUS_NEW=y
CONFIG_CTRL_IFACE_DBUS_INTRO=y
EOF
Install WPA Supplicant by running
the following commands:
cd wpa_supplicant &&
make BINDIR=/usr/sbin LIBDIR=/usr/lib
This package does not come with a test suite.
Now, as the root user:
install -v -m755 wpa_{cli,passphrase,supplicant} /usr/sbin/ &&
install -v -m644 doc/docbook/wpa_supplicant.conf.5 /usr/share/man/man5/ &&
install -v -m644 doc/docbook/wpa_{cli,passphrase,supplicant}.8 /usr/share/man/man8/
Install the systemd support files
by running the following command as the root user:
install -v -m644 systemd/*.service /usr/lib/systemd/system/
If you have built WPA Supplicant
with D-Bus support, you will need
to install D-Bus configuration
files. Install them by running the following commands as the
root user:
install -v -m644 dbus/fi.w1.wpa_supplicant1.service \
/usr/share/dbus-1/system-services/ &&
install -v -d -m755 /etc/dbus-1/system.d &&
install -v -m644 dbus/dbus-wpa_supplicant.conf \
/etc/dbus-1/system.d/wpa_supplicant.conf
![[Note]](../images/note.png)
Note
You will need to restart the system D-Bus daemon before you can use the
WPA Supplicant D-Bus interface.
Configuring wpa_supplicant
![[Important]](../images/important.png)
Important
If you are using WPA Supplicant with NetworkManager-1.54.0 (or anything
communicating with WPA Supplicant via D-Bus), this section should
be skipped. Running a D-Bus connected WPA Supplicant instance and
another WPA supplicant instance configured following this section
simultaneously can cause subtle issues.
Config File
/etc/wpa_supplicant/wpa_supplicant-*.conf
Configuration Information
To connect to an access point that uses a password, you need to
put the pre-shared key in /etc/wpa_supplicant/wpa_supplicant-wifi0.conf. SSID is
the string that the access point/router transmits to identify
itself. Run the following command as the root user:
install -v -dm755 /etc/wpa_supplicant &&
wpa_passphrase SSID | sed '/^\t#/d' > /etc/wpa_supplicant/wpa_supplicant-wifi0.conf
The wpa_supplicant
command will ask you to input the password of the access point.
/etc/wpa_supplicant/wpa_supplicant-wifi0.conf can hold
the details of several access points. When wpa_supplicant is started, it
will scan for the SSIDs it can see and choose the appropriate
password to connect.
If you want to connect to an access point that isn't password
protected, put an entry like this in /etc/wpa_supplicant/wpa_supplicant-wifi0.conf. Replace
"Some-SSID" with the SSID of the access point/router.
network={
ssid="Some-SSID"
key_mgmt=NONE
}
Connecting to a new access point that is not in the configuration
file can be accomplished manually via the command line, but it
must be done via a privileged user. To do that, add the following
to the configuration file:
ctrl_interface=DIR=/run/wpa_supplicant GROUP=<privileged group>
update_config=1
Replace the <privileged group> above with a system group
where members have the ability to connect to a wireless access
point.
There are many options that you could use to tweak how you
connect to each access point. They are described in some detail
in the wpa_supplicant/wpa_supplicant.conf file in the
source tree.
Connecting to an Access Point
There are 3 types of systemd
units that were installed:
The only difference between 3 of them is what driver is used for
connecting (-D option). The first one uses the default driver,
the second one uses the nl80211 driver and the third one uses the
wired driver.
You can connect to the wireless access point by running the
following command as the root
user:
systemctl start wpa_supplicant@wlan0
To connect to the wireless access point at boot, simply enable
the appropriate wpa_supplicant service by
running the following command as the root user:
systemctl enable wpa_supplicant@wlan0
Depending on your setup, you can replace the wpa_supplicant@.service with any other listed
above.
To assign a network address to your wireless interface, consult
the General
Network Configuration page in LFS.